Shift Interlock Solenoid: Service and Repair

Shift Lock Solenoid Replacement

NOTE: Do not wipe off the special grease that is applied to the shift lever when you disassemble or assemble it.

1. Remove the shift lever assembly A/T Shift Lever Removal.

2. Remove the shift lock solenoid connector.

3. Release the lock tab (A), then remove the shift lock solenoid (B).






4. Replace the shift lock solenoid (A), the solenoid plunger (B), and the plunger spring (C) assembly.





5. Install the shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop, then push the shift lock solenoid into the shift lever securely.

6. Route the shift lock solenoid harness in the guide, and install the clip (D) on the connector on the shift lever assembly/bracket base.

7. Install the shift lever assembly A/T Shift Lever Installation.