End Cover CVTF Feed Pipe Replacement

End Cover CVTF Feed Pipe Replacement

1. Remove the feed pipe flange plates (A), then remove the feed pipes (B) and the feed pipe flanges (C) from the end cover (D).

NOTE: Replace the end cover if replacement of the unremovable CVTF feed pipes (E) is required.





2. Install new O-rings (F) over the CVTF feed pipes.

3. Install new O-rings (G) on the feed pipe flanges.

4. Install the feed pipe (A) through the feed pipe flange (B) by aligning the feed pipe tab (C) with the guide (D) on the flange.





5. Install the CVTF feed pipe over the unremovable feed pipe (E), and align the mark (F) on the feed pipe flange between the tabs (G) on the end cover.

6. Install the feed pipe flange plate.