Speaker Test/Replacement

Speaker Test/Replacement

Front Door Speaker

1. Remove the front door panel Service and Repair.

2. Remove the bolt (A). Then lift the speaker (B) straight up to release the lower clips (C).





3. Disconnect the 2P connector (D), and remove the speaker.

4. Measure the resistance between terminals No. 1 and No. 2. There should be about 4 Ohms.

5. If the resistance is not as specified, replace the speaker.

Tweeter

1. Carefully pry the tweeter grille (A) out of the dashboard. Be careful not to damage the tweeter grille and the dashboard.





2. Disconnect the 2P connector (B) from the tweeter.

3. Remove the tweeter from the tweeter grille.






4. Measure the resistance between tweeter (A) terminal No. 2 and the outside terminal of the capacitor (B). There should be about 4 Ohms.

Also check the capacitor condition. If any problem is found, replace the tweeter.





5. If the resistance is not as specified, replace the tweeter.

Rear Speaker

1. Remove the rear speaker grille (A).






2. Remove the bolt (A). Then lift the speaker (B) straight up to release the clips (C).





3. Disconnect the 2P connector (D), and remove the speaker.

4. Measure the resistance between terminals No. 1 and No. 2. There should be about 4 Ohms.

5. If the resistance is not as specified, replace the speaker.