Shift Interlock Solenoid: Service and Repair

Shift Lock Solenoid Replacement

1. Remove the shift lever assembly A/T Shift Lever Removal.

2. Remove the A/T gear position indicator panel from the shift lever Overhaul.

3. Remove the shift lock solenoid harness (A) from the harness guides.





4. Release the lock tab (B) retaining the shift lock solenoid using a thin-bladed screwdriver.

5. Replace the shift lock solenoid (C), the solenoid plunger (D), and the plunger spring (E) assembly.

6. Apply silicone grease to the tip (F) of the shift lock stop and the solenoid plunger.

NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.

7. Install the shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop, then push the shift lock solenoid into the shift lever securely.

8. Install the shift lock solenoid harness in the harness guides.

9. Install the A/T gear position indicator panel on the shift lever Overhaul.

10. Install the shift lever assembly A/T Shift Lever Installation.