License Plate Light Replacement (4-Door)

License Plate Light Replacement

4-door '08-10 models

1. Pull the license plate light assembly out, and disconnect the 2P connector (A) from the license plate light.

License Plate Light: 5 W





2. Separate the lens (B) and housing (C), then remove the bulb.

3. Install the light in the reverse order of removal.

4-door '11 model

NOTE: When replacing the license plate light lens, go to step 3.

1. Remove the trunk lid trim panel Interior Trim Removal/Installation - Trunk Lid, and disconnect the 2P connector (A) from the light.

License Plate Light: 5 W





2. Separate the housing (B), then remove the bulb (C).

3. Remove the trunk lower trim .

4. Separate the lens (A) and housing (B).





5. Install the light in the reverse order of removal.