Radiator Cooling Fan Motor: Service and Repair

Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation

Removal

1. Raise the vehicle on the lift.

2. Remove the splash shield Splash Shield Replacement.

3. Remove the A/C compressor clutch connector (A) from the clamp, then remove the harness clamps (B).





4. Lower the vehicle on the lift.

5. Remove the air cleaner Service and Repair.

6. Remove the air duct bracket.






7. Disconnect the fan motor connectors (A) and the harness clamp (B).






8. Remove the coolant reservoir (A).





9. Remove the A/C condenser fan shroud assembly (B), then remove the radiator fan shroud assembly (C) from the A/C condenser fan shroud side.

10. Disassemble the fan shrouds.






Installation

1. Assemble the fan shrouds.






2. Install the radiator fan shroud assembly (A) onto the A/C condenser fan shroud side, then install the A/C condenser fan shroud assembly (B).





3. Install the coolant reservoir (C).

4. Connect the fan motor connectors (A) and the harness clamp (B).






5. Install the air duct bracket.





6. Install the air cleaner Service and Repair.

7. Raise the vehicle on the lift.

8. Install the A/C compressor clutch connector (A) to the clamp, then install the harness clamps (B).





9. Install the splash shield Splash Shield Replacement.

10. Lower the vehicle on the lift.