Hood Opener Cable Replacement

Hood Opener Cable Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body or the related parts.

1. Remove these items:

- Front inner fender Front Inner Fender Replacement
- Kick panel, driver's side

2. Disconnect the hood opener cable (A) from the hood latch (B) Service and Repair, and disconnect the hood opener cable from the hood release handle (C) Hood Release Handle Replacement. Take care not to kink the cable.





3. Detach the clips (D, E, F) with a clip remover, and remove the grommet (G) from the body, then remove the hood opener cable from the vehicle. Take care not to kink the cable.

4. Install the cable in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the cable is connected properly.
- Make sure the hood opens properly and locks securely.
- Push the clips into place securely.