Fuel Door: Service and Repair

Fuel Fill Door/Adapter Replacement

NOTE: Take care not to scratch the body.

1. Remove the fuel cap (A) by turning it counterclockwise, and remove the screw.






2. Carefully pull the fuel fill door/adapter lip (A) off of the fuel fill pipe (B).






3. While pulling the upper portion of the fuel fill door/adapter (A), turn the fuel fill door/adapter 90 ° counterclockwise with the fuel fill door partly opened.






4. Remove the fuel fill door/adapter (A).

1. Pull the lower portion of the fuel fill door/adapter out.

2. Pull the portion (B) of the hinge out from inside the body.

3. If necessary, release the hooks (C), then remove the fuel fill door push lifter (D) from the fuel fill door/adapter.





Fuel fill adapter grommet replacement

5. If necessary, pull out the fuel fill adapter grommet (A) and the fuel fill adapter packing (B) from the body.

NOTE: When reinstalling the packing, be sure the arrow mark (C) on the packing is on the upper side.






6. Install the fuel fill door/adapter in the reverse order of removal. If needed, lubricate the rubber edges of the adapter lip (A) to ease installation. Make sure the adapter lip is fully seated on the fuel fill pipe (B).