Rear Seat-Back Cover Replacement (GX Model)

Rear Seat-back Cover Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to tear or damage the seat covers.

1. Remove the seat-back. Rear Seat Removal/Installation

2. Remove the screw, then remove the center belt guide (A).






3. From the back of the seat-back, pass the four retainers (A) through the slots in the seat-back pad, release all the upholstery rings (B), and fold back the seat-back cover (C).






4. Pinch the tabs on the ends of the head restraint guides (A), and remove them from the seat-back.

'06-07 models





'08-10 models





5. Pull back the edge of the seat-back cover (A) all the way around, release the upholstery rings (B), and release the hooks (C) of the horizontal wires (D) from the vertical wires (E) on the pad, then remove the seat-back cover.






6. Install the seat-back cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.

- Replace all of the upholstery rings (A) fastening the seat-back cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).