Power Trunk / Liftgate Lock Switch: Testing and Inspection

Trunk Key Cylinder Switch Test

'06-08 models

1. Open the trunk lid.

2. Disconnect the 3P connector (A) from the trunk key cylinder switch (B).





3. Check for continuity between the terminals.

- There should be no continuity between terminals No. 2 and No. 3 when the switch is in the neutral position.
- There should be continuity between terminals No. 2 and No. 3 when the switch is in the UNLOCK position.

4. If the continuity is not as specified, replace the switch Service and Repair.