Fuel Pressure Pulsation Damper: Service and Repair

Fuel Pulsation Damper Replacement

1. Relieve the fuel pressure; '07-11 models Service and Repair.

2. Remove the engine cover.

3. Remove the fuel rail mounting nuts from the fuel rail.

4. Disconnect the fuel injector connectors.

5. Remove the fuel rail.

6. Place a wrench (A) on the fuel rail (B).





7. Place a wrench (C) on the fuel pulsation damper (D).

8. Remove the pulsation damper.

9. Install the parts in the reverse order of removal with the new washers.

NOTE:

- Replace all washers whenever the fuel pulsation damper is loosened or removed.
- If the drain hole (A) of the fuel pulsation damper cover does not face bottom, reinstall it as shown.