Engine Stalls (MIL Works OK, No DTCs Set)

Engine stalls (MIL works OK, no DTCs set)

Diagnostic Procedure:

1. Do the PCM idle learn procedure. ECM/PCM Idle Learn Procedure

2. Check the idle speed. Testing and Inspection

3. Troubleshoot the brake pedal position switch signal circuit. Brake Pedal Position Switch Signal Circuit Troubleshooting

4. Troubleshoot the fuel shut-off solenoid valve 1/fuel shut-off solenoid valve 2 circuit. Testing and Inspection

Also check for:

- Intake air leaks
- Faulty harness and sensor connections
- Lack of fuel
- Manual shut-off valve problems