CVT Output Shaft (Driven Pulley) Speed Sensor Replacement

CVT Output Shaft (Driven Pulley) Speed Sensor Replacement

1. Remove the air cleaner assembly Service and Repair and the intake air duct.

2. Disconnect the CVT output shaft (driven pulley) speed sensor connector, then remove the CVT output shaft (driven pulley) speed sensor (A).

3. Install a new O-ring (B) on a new CVT output shaft (driven pulley) speed sensor, then install the CVT output shaft (driven pulley) speed sensor in the transmission housing.

4. Check the connector for rust, dirt, or oil, then connect the connector securely.

5. Install the air cleaner assembly Service and Repair and the intake air duct.