CVT Input Shaft (Drive Pulley) Speed Sensor Replacement

CVT Input Shaft (Drive Pulley) Speed Sensor Replacement

1. Remove the air cleaner assembly Service and Repair and the intake air duct.

2. Disconnect the CVT input shaft (drive pulley) speed sensor connector, then remove the CVT input shaft (drive pulley) speed sensor (A).

3. Install a new O-ring (B) on a new CVT input shaft (drive pulley) speed sensor, then install the CVT input shaft (drive pulley) speed sensor in the transmission housing.

4. Check the connector for rust, dirt, or oil, then connect the connector securely.

5. Install the air cleaner assembly Service and Repair and the intake air duct.