A/T Gear Position Indicator Panel Light Harness/Park Pin Switch Replacement

A/T Gear Position Indicator Panel Light Harness/Park Pin Switch Replacement

NOTE: The A/T gear position indicator light and the park pin switch are not available separately. Replace the A/T gear position indicator light and the park pin switch as a set.

1. Remove the shift lever assembly. A/T Shift Lever Removal

2. Loosen the A/T gear position indicator panel. Overhaul

3. Remove the park pin switch (A) while pressing the park pin switch lock (B).






4. Remove the A/T gear position indicator panel light socket (A) from the indicator panel (B).

5. Remove the harness wire tie (C), and remove the park pin switch/A/T gear position indicator panel light harness connector (D) from the shift lever assembly/bracket base (E).

6. Install a new park pin switch (F) on the shift lever. Install the A/T gear position indicator panel light bulb in socket, and install it in the indicator panel.

7. Tie the harness together with a new harness wire tie, then install the harness wire tie on the shift lever bracket base.

8. Route the harnesses along the harness guides, and install the clip of the connector in the bracket base.

9. Install the A/T gear position indicator panel. A/T Shift Lever Installation

10. Install the shift lever assembly. A/T Shift Lever Installation