Front Individual Map Light Test/Replacement (Without Navigation)

Front Individual Map Light Test/Replacement

Without navigation

1. Turn the map light switch OFF.

2. Carefully pry the lens (A) off with a small screwdriver.





3. Remove the screws, then remove the map lights (B).

4. Disconnect the 3P connector (C) from the map lights.






5. Check for continuity between the terminals in each switch position according to the table.

6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light.

7. Install the map light in the reverse order of removal.