Rocker Arm and Shaft Disassembly/Reassembly

Rocker Arm and Shaft Disassembly/Reassembly

NOTE:

- Identify parts as they are removed so they can be reinstalled in their original location.

- Remove the rocker shaft bolts before disassembling the rocker arms.

- Inspect the rocker shaft and the rocker arms. Rocker Arm and Shaft Inspection

- If reused, the rocker arms must be installed in their original location.

- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.

- Apply new engine oil to the threads of the rocker shaft bolts when installing them.

- When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.