Power Mirror Actuator Test

Power Mirror Actuator Test

1. Remove the door panel. Service and Repair

2. Disconnect the 6P [or 8P] connector (A) from the power mirror actuator (B).










3. Check actuator operation by connecting power and ground according to the table.

4. If the mirror fails to work properly, replace the mirror actuator.






Defogger Test (With mirror defogger)

5. Check for continuity between terminals No. 1 and No. 2 of the 8P connector. There should be continuity.

6. If the continuity is not as specified, check for:
- An open in the wire.

- A faulty mirror holder.