Countershaft Bearing Replacement

M/T Countershaft Bearing Replacement

Special Tools Required
- Adjustable bearing puller, 45-75 mm 07YAC-0010100
- Bearing driver attachment, 72 x 75 mm 07746-0010600
- Driver handle, 15 x 135L 07749-0010000
- Slide hammer, 3/8''-16 UNF commercially available

1. Remove the bearing set plate (A) from the clutch housing (B).






2. Remove the needle bearing (A) from the clutch housing (B) using the 45-75 mm adjustable bearing puller (C) and a commercially available 3/8''-16 UNF slide hammer (D).






3. Install the new needle bearing (A) using the 15 x 135L driver handle (B) and the 72 x 75 mm bearing driver attachment (C).






4. Install the bearing set plate (A) with bolts (B).