Rear Seat-Back Cover Replacement

Rear Seat-back Cover Replacement

NOTE:
- Put on gloves to protect your hands.
- Take care not to tear the seams or damage the seat covers.

1. Remove the seat-back.
2. Remove the screw, then remove the center belt guide (A).






3. From the back of the seat-back, pass four retainers (A) through the slots in the seat-back pad, and release all the clips (B), and fold back the seat-back cover (C).






4. Pull out the head restraint guides (A) while pinching the end of the guides, and remove them.









5. Pull back the edge of the seat-back cover (A) all the way around, release the clips (B), and release the hooks (C) of the horizontal wires (D) from the vertical wires (E) on the pad, then remove the seat-back cover.






6. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace any clips (A) you removed with new ones. Install them with a commercially available upholstery ring pliers (B).