Driver's Dashboard Lower Cover Removal/Installation

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the Honda Tool and Equipment Program.

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Adjust the steering column upward.
2. Gently pull out on the lower edge of the dashboard lower cover (A) to detach the lower clips.






3. Detach the upper clips, and release the hook (A) and the pin (B) by pulling the driver's dashboard lower cover (C) back.






4. Install the cover in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips and the hooks into place securely.