Advanced Diagnostics
DTC P0780: Problem in Hydraulic Control SystemGeneral Description
DTC P0780 is stored simultaneously with P1898 (CVT drive pulley pressure control valve stuck ON or CVT driven pulley pressure control valve stuck OFF), or P1899 (CVT drive pulley pressure control valve stuck OFF or CVT driven pulley pressure control valve stuck ON).
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Refer to the specific DTC information for P1898 or P1899.
Malfunction Threshold
Either P1898 or P1899 is stored.
Driving Pattern
Refer to the specific DTC information for P1898 or P1899.
Diagnosis Details
Conditions for illuminating the MIL
When a malfunction is detected, the MIL comes on and the DTC and the freeze frame data are stored in the PCM memory.
Conditions for clearing the MIL
The MIL will be cleared if the malfunction does not recur during three consecutive trips in which the diagnostic runs.
The MIL, the DTC, and the freeze frame data can be cleared by using the scan tool Clear command or by disconnecting the battery.