P0602 (92)

DTC PO602 (92): BCM Module Programming Error

NOTE:
- To verify this is the appropriate troubleshooting procedure, jump the SCS with the HDS and read the flash code, or change the HDS setup to show HM codes and read the HM code.
- Before you troubleshoot, record all freeze data, and review the general troubleshooting information.
- Do not turn the ignition switch OFF while updating the BCM module. If you turn the ignition switch OFF before completion, the BCM module can be damaged.

1. Do the BCM module update procedure.
2. Check for IMA system Temporary DTCs or DTCs with the HDS.

Is DTC PO602 (92) indicated?

YES - Replace the original BCM module, then go to step 1.

NO - The update is complete. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.