Input Shaft (Mainshaft) Speed Sensor Replacement
Input Shaft (Mainshaft) Speed Sensor Replacement1. Do the battery removal procedure.
2. Remove the 6 x 1.0 mm bolt securing the resonator bracket under the battery base bracket, and remove the battery base and battery base bracket in the engine compartment.
3. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor (A).
4. Install the new O-ring (B) on the new input shaft (mainshaft) speed sensor, then install the input shaft (mainshaft) speed sensor.
5. Check the connector for rust, dirt, or oil, then connect the connector securely.
6. Install the battery base bracket and battery base, and secure the resonator bracket under the battery base bracket with the bolt.
7. Do the battery installation procedure.