J35Z2 Engine
Cylinder Head Cover RemovalFront
1. Remove the intake manifold.
2. Remove the three ignition coils from the front cylinder head.
3. Disconnect the five connectors (A) securing the harness holder, and remove the dipstick (B).
4. Remove the front cylinder head cover.
Rear
1. Remove the intake manifold.
2. Remove the three ignition coils from the rear cylinder head.
3. Disconnect the four connectors (A) and the clamp (B), and remove the power steering (P/S) hose bracket (C) and the breather hose (D).
4. Remove the two bolts (E) securing the harness holder.
5. Remove the rear cylinder head cover.
