Circuit Description
How the Circuit WorksCAUTION: Disconnect the window switch connector before you start. You could unintentionally switch the window to "automatic down" while working in the driver's or front passenger's door with the power on. The moving glass could injure your arms, hands, or fingers.
The power windows system is a multiplex controlled system. The power window master switch and the front passenger's, left rear, and right rear power window switches are the main operational controls of the power windows system. Both the power window master switch and the front passenger's power window switch contain a control unit.
Reversible electric motors drive the power windows. Each motor is protected by a non-serviceable built-in circuit breaker. The circuit breaker will reset automatically as it cools
Power Supply
Battery voltage is supplied at all times to the power window master switch through fuses 15 (in the under-hood fuse/relay box) and 24 (in the driver's under-dash fuse/relay box) and to the front passenger's power window switch through fuse 13 (in the passengers under-dash fuse/relay box). Battery voltage is also supplied at all times to the left and right rear power window relays through fuse 22 (in the driver's under-dash fuse/relay box) and fuse 11 (in the passengers under-dash fuse/relay box) respectively. With the ignition switch in ON (II), battery voltage is supplied to the power window master switch through fuse 16 (in the driver's under-dash fuse/relay box).
When the main switch is ON, the left and right rear power window relays are energized providing battery voltage to the left and right rear power window switches
Driver's Window
When the driver's switch of the power window master switch is pushed to DOWN or pulled to UP the signal for down or up is sent to the control unit. The control unit provides power and ground to the driver's power window motor, lowering or raising the window until the switch is released.
When the driver's switch is pushed to AUTO DOWN or pulled to AUTO UP, the signal for auto down or auto up is sent to the control unit. The control unit provides power and ground to the driver's power window motor, lowering or raising the window. As the window descends or ascends, the pulsar in the driver's power window motor sends pulsing signals to the control unit. When the window reaches the fully down or fully up position, the pulsing signal stops, and the control unit removes power and ground from the driver's power window motor. If something obstructs the window during the AUTO UP operation, the control unit will detect no pulses from the pulser. For safety reasons, the control unit will make the driver's power window motor stop immediately and reverse.
All Passenger Windows
All windows can be opened and closed by the power window master switch. The passenger windows are disabled when the main switch is OFF The driver's power window motor remains operable when the main switch is OFF.
Front Passenger's Window
When the front passengers switch of the front passenger's power window switch is pushed to DOWN or pulled to UP the signal for down or up is sent to the control unit. The control unit provides power and ground to the front passengers power window motor lowering or raising the window until the switch is released.
When the front passengers switch is pushed to AUTO DOWN or pulled to AUTO UP, the signal for auto down or auto up is sent to the control unit. The control unit provides power and ground to the front passenger's power window motor, lowering or raising the window. As the window descends or ascends, the pulser in the front passenger's power window motor sends pulsing signals to the control unit. When the window reaches the fully down or fully up position, the pulsing signal stops, and the control unit removes power and ground from the front passenger's power window motor. If something obstructs the window during the AUTO UP operation, the control unit will detect no pulses from the pulser. For safety reasons, the control unit will make the front passenger's power window motor stop immediately and reverse.
When the front passenger's window is opened or closed from the power window master switch, the control unit communicates that command via a multiplexed signal to the front passenger's power window switch.
Left Rear Window
When the left rear power window switch is pushed to DOWN, power is supplied to the coil of the left rear power window switch down relay, energizing it. Battery voltage is supplied to the left rear power window motor through the energized relay. A path to ground for the motor is provided by the left rear power window switch up relay, lowering the window until the switch is released or the window is fully lowered.
When the left rear power window switch is pulled to UP, power is supplied to the coil of the left rear power window switch up relay, energizing it. Battery voltage is supplied to the left rear power window motor through the energized relay. A path to ground for the motor is provided by the left rear power window switch down relay, raising the window until the switch is released or the window is fully lowered.
When the left rear window is opened or closed from the power window master switch, the control unit sends signals to the relays within the left rear power window switch.
Right Rear Window
When the right rear power window switch is pushed to DOWN, power is supplied to the coil of the right rear power window switch down relay, energizing it. Battery voltage is supplied to the right rear power window motor through the energized relay. A path to ground for the motor is provided by the right rear power window switch up relay, lowering the window until the switch is released or the window is fully lowered.
When the right rear power window switch is pulled to UP, power is supplied to the coil of the right rear power window switch up relay, energizing it. Battery voltage is supplied to the right rear power window motor through the energized relay. A path to ground for the motor is provided by the right rear power window switch down relay, raising the window until the switch is released or the window is fully lowered.
When the right rear window is opened or closed from the power window master switch, the control unit sends signals to the relays within the right rear power window switch.
Remote Transmitter Operation
The windows can be opened with the remote transmitter. By pressing the UNLOCK button twice and then holding it, all four windows and the moon roof will open. The windows and moonroof cannot be closed with the remote transmitter.
Ignition Key Operation
The windows can be opened and closed with the ignition key. By inserting the key into the driver's door key cylinder switch and turning the key clockwise twice and then holding it, all four windows and the moonroof will open. By inserting the key into the driver's door key cylinder switch and turning the key counterclockwise twice and then holding it, all four windows and the moonroof will close.