Transmission Fluid Inspection and Replacement

Transmission Fluid Inspection and Replacement

1. Raise the vehicle on a lift.
2. Remove the oil filler plug (A) and sealing washer (B), check the condition of the fluid, and make sure it is at the proper level (C).





3. If the fluid is dirty, remove the drain plug (A) and the sealing washer (B), and drain the fluid.





4. Install the drain plug with a new sealing washer, and refill the transmission fluid to the proper level.

Fluid Capacity
1.9 L (2.0 US qt) at fluid change
2.0 L (2.1 US qt) at overhaul

Always use Honda Manual Transmission Fluid (MTF).

5. Install the oil filler plug (C) with a new sealing washer.