Park Pin Switch Test
Park Pin Switch Test1. Remove these items:
^ Center console panel
^ Center console rear trim
^ Center console
2. Disconnect the park pin switch/A/T gear position indicator panel light connector.
3. Shift into P, and check for continuity between park pin switch/A/T gear position indicator panel light connector terminals No. 1 and No. 2. There should be no continuity.
4. Shift out of P, and check for continuity between connector terminals No. 1 and No. 2. There should be continuity.
5. If the park pin switch tests OK, install the center console. If the park pin switch fails the test, replace the park pin switch.