Ambient Light Replacement

Ambient Light Replacement

With moonroof

NOTE: The ambient light is built into the moonroof switch.

1. Remove the front individual map lights.
2. Disconnect the moonroof switch 12P connector (A) and the map light 3P connector (B).






3. Remove the moonroof switch (C) from the map light housing.
4. At the moonroof switch 12P connector, check the light by connecting battery power to the No. 3 terminal and ground to the No. 1 terminal. The ambient light should come on. If the light does not come on, replace the moonroof switch assembly.
5. Install the parts in the reverse order of removal.