Passenger's Dashboard Trim Removal/Installation
Passenger's Dashboard Trim Removal/InstallationSpecial Tools Required
KTC trim tool set SQJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Take care not to scratch the dashboard and its related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the passenger's dashboard trim (A).
1. Open the glove box.
2. Pull out on the outside bottom edge of the trim by hand.
3. Detach the clips along the trim.
4. Release the hook (B) from under the center panel (C).
2. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- First insert the hook under the center panel, then push the clips into place securely.