Driver's Inner Dashboard Trim Removal/Installation
Driver's Inner Dashboard Trim Removal/InstallationSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Take care not to scratch the dashboard and its related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the driver's inner dashboard trim (A).
1. Using the appropriate trim tool, pry up on the edge of the trim at the steering column side.
2. Detach the clips.
3. Release the hook (B) from under the center panel (C).
2. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- First insert the hook under the center panel, then push the clips into place securely.