Front Seat Torsion Bar Replacement
Front Seat Torsion Bar Replacement2-door Manual Height Adjustable Seat
NOTE:
- Put on gloves to protect your hands.
- Take care not to tear the seams or damage the seat covers.
1. Remove the front seat.
2. Adjust the seat to its maximum height.
3. Release the hook strips from both sides and under of the seat cushion frame, then loosen the seat cushion cover.
4. Lever a hooked shaped end of the front seat torsion bar (A) down using a large flat-tip screwdriver.
5. While holding the torsion bar (A) twisted, pull the end of it out of the seat frame, then carefully loosen the torsion bar.
6. Remove the other side end of the torsion bar from the hook (B), then remove the torsion bar from the seat frame.
7. Install the torsion bar in the reverse order of removal.