ATF Replacement

ATF Replacement

NOTE: Keep all foreign particles out of the transmission.

1. Bring the transmission up to normal operating temperature (the radiator fan comes on).

2. Park the vehicle on level ground, and turn the engine off.





3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).

4. Reinstall the drain plug with a new sealing washer (B).





5. Refill transmission with the recommended fluid into the filler hole (A) to the upper mark on the dipstick. Always use Honda ATF DW-1 (ATF-Z1 has been replaced with ATF DW-1, Honda Service News Nov 2010) Automatic Transmission Fluid (ATF). Using a non-Honda ATF can affect shift quality.

6. Install the ATF filler bolt (B) with a new sealing washer (C).

7. Check that the fluid level is between the upper mark and lower mark on the dipstick.