Shift Solenoid Valve B Test

Shift Solenoid Valve B Test





1. Connect the HDS to the DLC (A).
2. Choose Shift Solenoid B in Miscellaneous Test Menu on the HDS.
3. Check that the shift solenoid valve B operates with the HDS. A clicking sound should be heard.
^ If a clicking sound is heard, the valve is OK.
^ If no clicking sound is heard, go to step 4.
4. Remove the intake air duct and air cleaner housing.





5. Disconnect shift solenoid valve B connector.
6. Measure shift solenoid valve B resistance at the solenoid valve connector terminals.
Standard: 12 - 25 Ohms
7. Replace shift solenoid valve B if the resistance is out of standard.
8. If the resistance is within the standard, connect the battery negative terminal to shift solenoid valve B connector terminal No. 1, and connect the battery positive terminal to the terminal No. 2.
^ If a clicking sound is heard, the valve is OK.
^ If no clicking sound is heard, replace shift solenoid valve B.
9. Install the air cleaner housing and intake air duct.