Rear Door Weatherstrip: Service and Repair
Rear Door Weatherstrip Replacement4-door
NOTE:
- Take care not to scratch the door.
- Use a clip remover to remove the clips.
1. At the B-pillar, remove the detent rod mounting bolt (A).
2. Detach the clips (B, C), then remove the door weatherstrip (D).
3. Install the weatherstrip in the reverse order of removal, and note these items:
- Check if the clip is damaged or stress-whitened, and if necessary, replace it with new one.
- Make sure the weatherstrip is installed in the holder (E) securely.
- Apply medium strength type liquid thread lock to the detent rod mounting bolt before installation.
- Test-drive and check for wind noise.
- Check for water leaks.