Cylinder Head Cover Removal

Cylinder Head Cover Removal

FRONT
1. Remove the intake manifold.
2. Remove the three ignition coils from the front cylinder head.
3. Remove the two bolts (A) securing the harness holder, and remove the dipstick (B).





4. Remove the front cylinder head cover.





REAR
1. Remove the right side windshield wiper arm.
2. Remove the passenger's cowl cover.
3. Remove the harness clamp (A) and accelerator pedal position (APP) sensor mounting bolt (B), then remove the right front strut bar (C) from the body.





4. Remove the intake manifold.
5. Remove the three ignition coils from the rear cylinder head.
6. Disconnect the three injector connectors, rocker arm oil control solenoid (VTEC solenoid valve) connector, and rocker arm oil pressure switch VTEC oil pressure switch) connector from the rear cylinder head.
7. Remove the three bolts (A) securing the harness holder.





8. Remove the breather hose (B) and ground cable (C).
9. Remove the rear cylinder head cover.