Passenger's

Dashboard Side Vent Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014*

*Available through the American Honda Tool and Equipment Program; call 888-424-6857




Passenger's

NOTE:
- Take care not to scratch the dashboard and related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Detach the hook of the glove box damper, then lower the glove box.
2. Carefully insert the trim tool under the inner clip, and push it up.
3. Carefully insert the trim tool in under the outside of the passenger's side vent (A) next to the outer clip. Pry out the outer clip to release the upper and side tabs (B). Then remove the vent.
4. Reinstall the tab portions of the vent first, then push the clip portions into place securely.