Driver's

Dashboard Side Vent Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014*

*Available through the American Honda Tool and Equipment Program; call 888-424-6857

Driver's

NOTE:
- Take care not to scratch the dashboard and related parts.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Remove the driver's dashboard lower cover.




2. Push up the lower clips by hand, then push out the driver's side vent (A) by releasing the upper and side tabs(B).
3. Reinstall the tab portions of the vent first, then push the clip portions into place securely.