Audio Disc Does Not Eject (With Navigation)

Special Tools Required
- Radio test harness breakout box 07AAZ-SDAA100
- Test harness A&B (Alpine) 070AZ-SDAA100

Audio disc does not eject (with navigation)

NOTE: Inspect the quality of the Discs, and make sure there are no adhesive labels applied to them.

1. Check to see if the disc ejects correctly by pushing the EJECT button.

Is it normal?

YES - Operation is normal.

NO - Go to step 2.

2. Check to see if the disc ejects with some binding or does not eject at all.

Does the disc bind when it ejects?

YES - Go to step 3.

NO - Go to step 4.

3. Replace the disc with a different one and recheck.

Does the problem continue?

YES - Faulty audio unit.

NO - Faulty disc.

4. Remove the audio unit.
5. Connect the test harness (070AZ-SDAA100) to the radio test harness breakout box (07AAZ-SDAA100).




6. Connect the test harness connector to the printed circuit board connector of the audio unit.
7. Connect the ohm meter to the breakout box (07AAZ-SDAA100 adapter) EJECT and GND terminals.
8. Press the EJECT button and check for continuity between the EJECT and GND terminals.

Is there continuity?

YES - Replace the audio unit

NO - Replace the audio-HVAC display panel.