Tightening Torque and Sequence

Drive Plate





Attach the flywheel to the drive plate with six bolts. Rotate the crankshaft pulley to tighten the bolts to 1/2 of the specified torque, then to the final torque, in a crisscross pattern. After tightening the last bolt, check that the crankshaft rotates freely.


Fluid Pan





Install the ATF pan (A) with the two dowel pins (B) and the new gasket (C).

CVT Differential Component Location Index:

CVT Differential

For additional specifications, please refer to Automatic Transmission/Transaxle / Service and Repair / Procedures Service and Repair