Shift Lock Solenoid Test

Shift Lock Solenoid Test





1. Connect the HDS to the DLC (A).
2. Choose shift Lock Solenoid Test in the Miscellaneous Test Menu, and recheck that the shift lock solenoid operates with the HDS.

NOTE: If the HDS does not communicate with the PCM, troubleshooting the DLC circuit.

3. Make sure that the shift lever can be moved of the P position with the Shift Lock Solenoid: ON. Move the shift lever back in the P position, and make sure it locks with the Shift Lock Solenoid: OFF.
4. Make sure that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released.
5. If shift lock solenoid does not work properly, do the shift lock system troubleshooting.