4. Intermediate Housing Disassembly & Service

Intermediate Housing

Manual Valve Body Disassembly, Inspection, and Reassembly





1. Remove the spring seat (A), valve spring (B), and reverse inhibitor valve (C) from the manual valve body (D).
2. Remove the manual valve (E).
3. Check all parts for wear and damage.
4. Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air. Blow out all passages.
5. Coat all parts with CVTF during assembly.





6. Install the reverse inhibitor valve (A) and valve spring (B) in the manual valve body (C). Push the valve spring in with a screwdriver (D), then install the spring seat (E).