3. End Cover Disassembly & Service
End CoverATF Feed Pipe Replacement
1. Remove the feed pipe flange plate (A), then remove the feed pipe (B) and feed pipe flange (C) from the end cover (D).
NOTE: Replace the end cover if replacement of the undetachable ATF feed pipes (E) is required.
2. Install the new O-ring (F) over the ATF feed pipe.
3. Install the new O-ring (G) on the feed pipe flange.
4. Install the feed pipe (A) through the feed pipe flange (B) by aligning the feed pipe tab (C) with the guide (D) on the flange.
5. Install the ATF feed pipe over the undetachable feed pipe (E), and align the mark (F) on the feed pipe flange between the tabs (G) on the end cover.
6. Install the feed pipe flange plate.