SRS Indicator Stays ON:

SRS indicator stays on, but no DTCs are stored

1. Turn the ignition switch ON (II), and see if the MIL comes on and stays on.

Does the MIL come on?

YES - Go to step 3.

NO - Check for a PGM-FI System DTC and troubleshoot as necessary.

2. Connect the HDS to the data link connector located under driver's side of the dashboard.
3. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not troubleshoot the DLC circuit.
4. In Body Electrical on the HDS, check for DTC.

Is DTC B1187 indicated?

YES - Troubleshoot DTC B1187.

NO - Faulty gauge control module (tach); replace the gauge control module (tach).