DTC 62

DTC 62: Control Unit High Voltage
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Start the engine, then wait 10 seconds.
4. Check for DTCs with the HDS.
Is DTC 62 indicated?
YES - Go to step 5.
NO - Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the servo unit.

5. Turn the ignition switch OFF.
6. Start the engine.
7. Check the battery voltage.
Is the voltage OK?
YES - Replace the servo unit.
NO - Do the charging system indicator circuit troubleshooting, then go to step 1 and recheck.