Countershaft Bearing Replacement

Countershaft Bearing Replacement

Special Tools Required
^ Adjustable bearing puller, 45 - 75 mm 07YAC-0010100
^ Attachment, 72 x 75 mm 07746-0010600
^ Driver 07749-0010000





1. Remove the bearing set plate (A) from the clutch housing (B).





2. Remove the needle bearing (A) from the clutch housing (B) using the special tool and a commercially available 3/8"-16 slide hammer (C).





3. Install the new needle bearing (A) using the special tool.





4. Install the bearing set plate (A) with bolts (B).