Front Door Window Glass Weatherstrip: Service and Repair

Front Door Glass Outer Weatherstrip Replacement

Special Tools Required
KTC trim tool set SOJATP2014

NOTE:
- If you remove the door glass outer weatherstrip, replace it with a new one because it will bend.
- Put on gloves to protect your hands.
- Take care not to scratch the door.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Remove these items:
- Door panel, 2-door, 4-door
- Mirror
- Door sash trim, 2-door




2. 4-door: Remove the screw from the rear edge of the door.




3. Starting at the rear, pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the window slot.




4. Pull the rear of the glass outer weatherstrip (A) away from the door, then release the front clip (B) from the mounting hole in the door. If necessary, pry the clip, then remove the weatherstrip.
5. Install new weatherstrip in the reverse order of removal, and perform the power window control unit reset procedure (driver's). Testing and Inspection