2-Door

Taillight Replacement

2-door

1. Open the trunk lid and remove the trunk side trim panel.




2. Disconnect each connector from the taillight.
3. Remove the four nuts and the taillight.
4. Install in the reverse order of removal.
5. When installing the taillight, check the gasket; if it is distorted or stays compressed, replace it.
6. Tighten the taillight mounting nuts to 5 N.m (0.5 kgf.m, 4 lbf.ft).
7. After installing the taillight, run water over it to make sure it does not leak.