Passenger's Window Switch Input Test
Passenger's Window Switch Input Test1. Remove the door panel.
- 2-door
- 4-door
2. Disconnect the 5P connector (A) from the switch (B).
3. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.
4. Reconnect the connector, and make these input tests at the connector. If any test indicates a problem, find and correct the cause, then recheck the system.
5. Disconnect the 5P connector, and make these input tests.