Dome Lamp: Testing and Inspection

Ceiling Light/Spotlight Test/Replacement

With moonroof

1. Turn the ceiling light/spotlights switch OFF.




2. Carefully pry off the lens (A) with a small screwdriver.
3. Remove the two screws and the housing (B).
4. Disconnect the 4P connector (C) from the housing.




5. Check the bulbs. If the bulbs are OK, check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, replace the ceiling light.

Ceiling Light Test/Replacement

Without moonroof

1. Turn the light switch OFF.




2. Carefully pry off the lens (A) with a small screwdriver.
3. Remove the two mounting screws.
4. Disconnect the 3P connector (B) from the housing (C).




5. Check the bulbs. If the bulbs are OK, check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, replace the ceiling light.